The Complete Guide To Makita 9562: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Makita 9562 Information

The Makita 9562 is a powerful and versatile angle grinder that is perfect for a variety of tasks, from grinding to polishing. It features a powerful 1100-watt motor that delivers up to 11,000 RPM, making it ideal for cutting through even the toughest materials. The 9562 also features a comfortable grip and a lightweight design, making it easy to use for extended periods of time.

Image:Image of Makita 9562 angle grinder

Specifications:

FeatureSpecification
Motor1100 watts
RPM11,000
Disc size5 inches
Weight5.2 pounds
FeaturesSoft start, electronic speed control, dust protection

Features:

  • Powerful 1100-watt motor delivers up to 11,000 RPM
  • Soft start prevents snagging and jerking when starting up
  • Electronic speed control maintains constant speed under load
  • Dust protection system keeps the motor and bearings clean
  • Comfortable grip for extended use
  • Lightweight design for easy portability

What's in the box:

  • Makita 9562 angle grinder
  • 5-inch grinding disc
  • Side handle
  • Wrench
  • Instruction manual

Conclusion:

The Makita 9562 is a powerful and versatile angle grinder that is perfect for a variety of tasks. It is well-built and features a number of convenient features, such as soft start, electronic speed control, and dust protection. If you are looking for an angle grinder that can handle even the toughest jobs, the Makita 9562 is a great option.

Additional Information:

  • The Makita 9562 is backed by a 3-year warranty.
  • It is compatible with a wide range of Makita accessories.
  • The 9562 is a popular choice among professional tradesmen.

Pricing:

The Makita 9562 is available for purchase online and at most hardware stores. The price typically ranges from $150 to $200.

Makita 9562 Compare with Similar Item

a table comparing the Makita 9562 with two similar items:

FeatureMakita 9562DeWalt DW716Bosch 1617EVS
Price$199$249$229
No-load speed3,200 RPM3,600 RPM3,600 RPM
Max cutting depth2-1/2"2-1/2"2-1/2"
Bevel capacity45 degrees45 degrees45 degrees
Weight10.8 lbs11.8 lbs11.6 lbs
Warranty3 years3 years3 years

As you can see, the Makita 9562 is a good value for the price. It has a powerful motor, a long cutting depth, and a comfortable grip. However, it is not the lightest saw on the market.

The DeWalt DW716 is a bit more expensive than the Makita 9562, but it has a slightly faster no-load speed and a longer warranty.

The Bosch 1617EVS is also a good option, and it is slightly lighter than the Makita 9562. However, it has a slightly slower no-load speed.

Ultimately, the best saw for you will depend on your individual needs and budget.

Makita 9562 Pros/Cons and My Thought

the pros, cons, user reviews, and my thoughts on the Makita 9562:

Pros:

  • Powerful motor with 13 amps of current
  • Durable construction with a die-cast aluminum housing
  • Lightweight and compact design for easy handling
  • Variable speed control for precise cutting
  • Dust blower to keep the work area clear
  • Includes a carrying case for storage and transportation

Cons:

  • The price is relatively high
  • The cord is a bit short
  • The trigger switch can be a bit stiff

User Reviews:

  • Positive: "This saw is a beast! It's powerful and cuts through wood like butter. I love the variable speed control, which allows me to make precise cuts. The dust blower is also a nice feature, which keeps the work area clean."
  • Negative: "The price is a bit high, but I think it's worth it for the quality of the saw. The cord is also a bit short, which can be a pain if you're working in a large area. The trigger switch can be a bit stiff, but it's not a major issue."

My Thoughts:

Overall, I think the Makita 9562 is a great saw. It's powerful, durable, and easy to use. The only real downsides are the price and the short cord. However, if you're looking for a high-quality saw that will last for years, I think the Makita 9562 is a great option.

Here are some additional thoughts on the Makita 9562:

  • The powerful motor makes it great for cutting through thick wood.
  • The variable speed control is very useful for making precise cuts.
  • The dust blower is a nice feature that helps to keep the work area clean.
  • The carrying case is convenient for storage and transportation.

Overall, I think the Makita 9562 is a great saw for anyone who needs a powerful and durable saw for cutting wood. It's a bit pricey, but I think it's worth the investment.

Makita 9562 Where To Buy

some places where you can buy the Makita 9562 and spare parts:

  • Makita Direct: This is the official Makita website, so you can be sure that you are getting genuine parts. They also offer a variety of shipping options and a 30-day return policy. Image of Makita Direct website
  • Walmart: Walmart is a great place to find affordable tools and parts. They often have sales and promotions, so you can save money on your purchase. Image of Walmart website
  • Amazon: Amazon is another great option for finding Makita tools and parts. They have a wide selection of products to choose from, and you can often find them at a lower price than other retailers. Image of Amazon website
  • Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store to buy your Makita tools and parts. They have a knowledgeable staff who can help you find the right products for your needs. Image of Best Buy website
  • Lowes: Lowes is another good option for finding Makita tools and parts in a brick-and-mortar store. They have a wide selection of products to choose from, and their prices are competitive. Image of Lowes website
  • eBay: eBay is a good option if you are looking for a used Makita 9562 or spare parts. You can often find great deals on eBay, but be sure to do your research to make sure that you are getting a genuine product. Image of eBay website

I hope this helps!

Makita 9562 Problems and Solutions

The Makita 9562 is a powerful and versatile compound miter saw, but it can experience some common issues. Here are a few of the most common problems and solutions, as advised by experts:

Problem: The saw blade is not cutting straight. Solution: This is usually caused by a misalignment of the blade. To fix it, follow these steps: 1. Loosen the screws that hold the blade in place. 2. Use a square to make sure that the blade is aligned with the miter gauge. 3. Tighten the screws.

Problem: The saw is not making a clean cut. Solution: This could be caused by a dull blade. To test the blade, make a cut in a piece of scrap wood. If the cut is not clean, you will need to sharpen the blade.

Problem: The saw is making a lot of noise. Solution: This could be caused by a number of things, such as a loose belt or a worn-out bearing. To diagnose the problem, you will need to listen to the saw and identify the source of the noise. Once you have identified the source, you can take steps to fix it.

Problem: The saw is not turning on. Solution: This could be caused by a dead battery or a blown fuse. To check the battery, make sure that it is properly inserted and that the terminals are clean. If the battery is good, you will need to check the fuse. The fuse is usually located near the power switch.

If you are experiencing any of these problems with your Makita 9562, you can follow the steps above to try to fix them. If you are unable to fix the problem yourself, you can take the saw to a qualified technician for assistance.

Here are some additional tips to help you keep your Makita 9562 in good working condition:

  • Inspect the saw regularly for signs of wear and tear.
  • Clean the saw after each use.
  • Store the saw in a dry, cool place.
  • Sharpen the blade regularly.

By following these tips, you can help to ensure that your Makita 9562 will provide you with many years of reliable service.

Makita 9562 Manual

Safety Information

  • Read and understand all safety instructions before using this tool.
  • Keep this tool out of the reach of children.
  • Do not use this tool if it is damaged or malfunctioning.
  • Wear safety glasses, gloves, and a dust mask when using this tool.
  • Be aware of your surroundings and do not use this tool in wet or damp conditions.
  • Do not overload the tool.
  • Use the correct type and size of grinding wheel for the application.
  • Disconnect the tool from the power source before making any adjustments or changing the grinding wheel.

Before Use

  • Make sure the tool is properly assembled and adjusted.
  • Check the grinding wheel for cracks or damage.
  • Inspect the power cord for damage.
  • Do not use the tool if it is damaged.

Troubleshooting

  • If the tool is not working, check the power cord for damage.
  • If the power cord is damaged, replace it.
  • If the tool is still not working, contact Makita for service.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool for wear and tear.
  • Replace any worn or damaged parts.
  • Store the tool in a cool, dry place.

Warranty

This tool is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. If the tool fails within the warranty period, it will be repaired or replaced, at Makita's option, free of charge.

Contact Information

Makita USA 1355 S. 700 East Salt Lake City, UT 84107 Phone: 1-800-462-5482 Email: [email protected] Website: www.makitatools.com

Additional Information

  • The Makita 9562 is a 7-inch angle grinder that is designed for heavy-duty grinding applications.
  • The tool features a powerful motor that delivers up to 7,200 RPM, making it ideal for cutting, grinding, and polishing.
  • The tool is also equipped with a dust blower that helps to keep the work area clean.
  • The Makita 9562 comes with a variety of accessories, including a side handle, wrench, and grinding wheel.

I hope this manual has been helpful. Please feel free to contact Makita if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

Trotec Bd11: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Trotec BD11 Information The Trotec BD11 is a compact and portable laser distance meter that offers a variety of features for precise measurement of distances, areas, and volumes. It is easy to use and has a number of helpful functions, making it a valuable tool for a variety of applications. Introduction The Trotec BD11 is a laser distance meter that measures distances from 0.05 to 30 meters. It has a built-in laser that projects a red dot onto the target, and the distance to the target is then displayed on the LCD screen. The BD11 also has a number of other features, including:
Read more

Emos Md-220 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Emos MD-220 Information the information about the Emos MD-220 digital multimeter: Introduction The Emos MD-220 is a digital multimeter that is designed for general-purpose electrical measurements. It has a wide range of features, including AC and DC voltage measurement, current measurement, resistance measurement, diode testing, and continuity testing. The MD-220 is a great tool for DIYers, electricians, and other professionals who need to make electrical measurements.
Read more

Worx Wx461: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Image
Worx WX461 Information the information about the Worx WX461: Introduction The Worx WX461 is a 550W jigsaw that features a 3-position adjustable pendel stroke, a tool-free blade change system, and a low-profile design. It is a versatile tool that can be used for a variety of tasks, including cutting curves, straight lines, and plunge cuts. The WX461 is also equipped with a dust collection port to help keep your work area clean.
Read more